Ozaki Worldwide NB002 - Manual (Page 3)

If your PC system has more than "one USB port, you can just
plug USB speaker to any USB port. If this connect is right that
driver will detect device and show a task bar on the bottom
right side of the screen to guiding you which port is correct.
Step 4
Experience 5.1CH Virtual Sound
Step 3
Install Driver
2. Please follow up the set
up procedure and click
"Next" button to continue
installation. 3. You can Select install
driver only or both driver
and demo program then
click "Next" to continue
installation. 4. If your System is
WinXP, you may see a
dialog box asking you
about windows logo issue,
please click "Continue
Anyway" to complete
installation. 5. When set up
program complete
installation system will
need to restart to
initialize the driver. 6. Restart & Finish 1. Click "Setup" to install.
Before install Xear™ 3D sound audio driver,
please make sure that USB speakers have
connected to PC system already.
Part I.
Volume Adjust & Position Test
Where can you fine the control panel ?
You can open "control panel" to find Xear
TM 3D audio driver and
enable it. Or, you can check the bottom right side of the screen
to double click Xear
TM 3D task bar button.
Click Speaker graphic
to test speaker sound
Output Device Select
Master Volume Control
Part II.
Hardware
and
Software
AGC Function
Select
Xear™ 3D supports
loudness function which
allows users to amplify
the sound source. This
special feature can make
speaker sound louder
beyond its limitation.
Auto Test and stop
Click Speaker graphic to
test speaker sound
Enhanced
Your USB Speaker
Sound Quality