Onkyo CR-305FX - Manual (Page 24)

24
MEMORY FM MODE
CLEAR
Listening to a stereo radio station
When you tune in a stereo FM station, the STEREO indicator lights
up if the signal is sufficiently strong.
If the signal is weak, you can still listen to the station in mono mode.
In this case, tune in as follows.
1. Press the FM MODE button.
The MONO indicator lights up.
2. Select the station you would like to listen to using the TUN-
ING/PRESET buttons.
1
2
1
2
Selecting preset stations
Follow the procedure below to select a preset station stored in
memory.
1. Select FM or AM using the INPUT buttons or the IN-
PUT buttons on the remote controller.
2. Use the TUNING/PRESET buttons or the TUNER PRE-
SET buttons on the remote controller to select the de-
sired preset station.
The preset station can also be selected by using the number but-
tons on the remote controller.
• Use buttons 1 to 9 to select presets 1 to 9. Use button 0 to select
preset 10. To preset station 11 and upwords, press the +10 button
followed by the corresponding two number buttons.
Examples:
5: 5
12: +10 1 2
25: +10 2 5
Clearing preset stations
You can clear preset stations from the preset memory.
1. Select the station as explained in the previous section.
2. Press and hold the MEMORY button and press the FM
MODE button within a second.
“– – ” appears on the display.
Note
• If you fail to press the FM MODE button while holding down the
MEMORY button immediately, the AUTO MEMORY function
will start operating.
FM MODE
Receiving stations
INPUT
DISPLAY
TUNING/PRESET
STANDBY/ON MEMORY FM MODE
CLEAR
PHONES
INPUT
MAX MIN
A C O U S T IC P R E S E N C E
VOLUME
INPUT MEMORY
STEREO
MHz
MONO
Displayed
TUNING/PRESET
INPUT
INPUT
Remote controller
TUNING/PRESET
TUNER
PRESET
Remote controller
TUNING/PRESET
TUNER /PRESET
MEMORY FM MODE
CLEAR
TAPE
CD
TIMER
ENTER
+10
7
8 9
0
4
5 6
2 3
1
CLOCK CALL
CLEAR
REPEAT
MEM
SLEEP
RANDOM
MUTING
A.PRESENCE
STANDBY/ ON
INPUT
TUNER
PRESET
Number
buttons