Using the timer, Sleep function – Onkyo CR-305FX User Manual
Page 31
31
Sleep function
The Sleep function can be performed only by using remote control-
ler.
The SLEEP timer automatically sets the entire system to Standby
mode after a specified period of time.
1. Start playing something you would like to listen to.
2. Press the SLEEP button repeatedly to set the desired sleep
time.
The time value will decrease from 90 minutes to 10 minutes in
steps of 10 minutes.
After a specified period of time, the unit will be automatically
placed in Standby mode.
• To check the remaining time while the SLEEP function is active,
press the SLEEP button.
• After CD dubbing is complete, the unit will be placed in Standby
mode.
Cancelling the SLEEP setting
Press the SLEEP button repeatedly until the SLEEP indicator on the
display disappears.
Notes for timer setting
• Make sure that the clock has been set correctly before setting the
timer.
• After setting the timer, be sure to set this unit in Standby mode. If
this unit is not in Standby mode, the timer will not work.
• When the power is turned on by one of the timer mode settings,
the other timer modes may not be activated at their ON time. The
power will be switched off by the first timer mode at its OFF
time. Set a gap of one minute or more between the OFF time and
ON time for each timer setting. (See the figure on the left.)
• If you press the SLEEP button during timer play or timer record-
ing, the power will be switched off at the SLEEP timer's OFF
time.
• If more than two timer mode settings are made at the same time,
the “WEEKDAY” setting has the priority over the “WEEKEND”
setting. The “REC” mode setting has no priority.
• The timer recording setting will be cancelled if the recording does
not start at the ON time (for example, if the power is already on).
Using the timer
SLEEP
STEREO
MIN
AUTO
SLEEP
SLEEP
ON
OFF
ON
OFF
Time
WEEKDAY
REC
WEEKEND
9:00
10:00
11:00
12:00
activate
not activate
activate
TAPE
CD
TIMER
ENTER
+10
7
8
9
0
4
5
6
2
3
1
CLOCK
CALL
CLEAR
REPEAT
MEM
SLEEP
RANDOM
MUTING
A.PRESENCE
STANDBY/ ON
INPUT
TUNER
PRESET