Opticon OPR 3001 - Manual (Page 23)

Opticon
OPR 3001
Specifications Manual
23
8.2. USB Interface Specification
8.2.1. Settings and Communication
Reading menu barcodes [ZZ] + [SU] + [ZZ] can set the USB interface default.
The OPR 3001 USB model uses a full-speed USB interface.
8.2.2. Interface Circuit
Figure 18: USB interface circuit
Do not operate the keyboard while the scanner is transmitting the data to the host;
it may cause data transactions to fail.
8.3. Wedge Interface Specification
8.3.1. Settings and Communication
a) With desktop PC (using external keyboard)
Reading menu barcodes [ZZ] + [UB] + [KM] + [ZZ] can set the DOS/V Wedge
interface default.
b) With notebook PC (not using external keyboard)
Reading menu barcodes [ZZ] + [UB] + [KL] + [ZZ] can set the DOS/V Wedge
interface default.
Do not operate the keyboard while the scanner is transmitting the data to the host;
it may cause data transactions to fail.