Outdoor Gourmet M6G-124 - Manual (Page 5)

seated over the orifice located on the gas valves. Cleaning of the venturi tube should
be conducted periodically.
BEFORE USING PROPANE CYLINDER
1. Check cylinder and appliance seals. Never use with damaged or missing seals.
Discard cylinder if dust or rust particular are in valve area.
2. Turn control valve OFF before attaching cylinder. Attach only outdoors, in a well
ventilated area, away from flames, sparks or other sources of ignition.
BURNING PROPANE CAN MAKE CARBON MONOXIDE (CO), A COLORLESS,
ODORLESS GAS THAT CAN CAUSE DEATH. NEVER USE YOUR GRILL IN AN
ENCLOSED SPACE, SUCH AS A TENT OR CAMPER. NEVER USE YOUR GRILL
AS A HEATER OR FOR ANY PURPOSE OTHER THAN GRILLING.
INSTALL CYLINDER
1. Remove cap from end of propane cylinder. Cap should be kept on cylinder when
not in use to prevent dirt and debris from entering regulator valve. Check end of
cylinder attachment for dirt and debris. Clean out if necessary.
2. Insert threaded end of cylinder into regulator / control valve and hand-tighten. Do
not use tools! Over-tightening can damage threads on regulator.
3. PERFORM A LEAK TEST. (Refer to page 5 for instructions on how to perform a
leak test).
Please note:
This table top propane grill has been designed to work effectively without the use of
lava rocks.
Leak Testing Regulator / Cylinder Connection – IMPORTANT!
During leak testing, keep grill away from open flames or sparks and do not smoke.
Grill must be leak tested outdoors in a well-ventilated area. Leak test must be
repeated each time propane cylinder is replaced or after storage.
- 4 -