Onkyo HT-R518 - Manual (Page 58)

58
Adjusting the Listening Modes —Continued
Speaker Levels
You can adjust the volume of each speaker while listen-
ing to an input source.
These temporary adjustments are cancelled when the AV
receiver is set to Standby.
■ Subwoofer
You can adjust the level from –15 dB to +12 dB.
■ Center
You can adjust the level from –12 dB to +12 dB.
Notes:
• You cannot use this function while the AV receiver is
muted.
• Speakers that are set to No or None in the Speaker
Configuration cannot be adjusted (see page 59).
A/V Sync
■ A/V Sync
When using progressive scanning on your DVD player,
you may find that the picture and sound are out of sync.
With this setting, you can correct this by delaying the
audio signals. You can set it from 0 to 100 milliseconds
(ms) in 20 millisecond steps.
Note:
• This setting is not available when the Pure Audio lis-
tening mode is used, or the Direct listening mode is
used with an analog input signal.
With the Late Night function, you can reduce the
dynamic range of Dolby Digital material so that you can
still hear quiet parts even when listening at low volume
levels—ideal for watching movies late at night when you
don’t want to disturb anyone.
Notes:
• The Late Night function can be used only when the
input source is Dolby Digital.
• The effect of the Late Night function depends on the
material that you are playing and the intention of the
original sound designer, and with some material there
will be little or no effect when you select the different
options.
• The Late Night function is set to Off when the AV
receiver is set to Standby.
With the CinemaFILTER, you can soften overly bright
movie soundtracks, which are typically mixed for repro-
duction in a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Pro Logic II Movie, Dolby
Pro Logic Movie, DTS, DTS Neo:6 Cinema, DTS 96/24,
and Neo:6.
Note:
• The CinemaFILTER may not work when used with
certain input sources.
Using the Late Night Function
(Dolby Digital only)
Press the [LATE NIGHT] button
repeatedly to select.
Off: Late Night function off
(default).
Low: Small reduction in dynamic
range.
High: Large reduction in dynamic
range.
Using the CinemaFILTER
Press the [CINEMA FILTER] but-
ton repeatedly to select.
Off: CinemaFILTER off.
On: CinemaFILTER on.
LATE NIGHT
CINEMA
FILTER
HT-R518_En.book Page 58 Tuesday, March 11, 2008 11:31 AM