Onkyo TX-SR573 - Manual (Page 40)

40
Listening to the Radio—Continued
Positioning the XM Antenna
You can check the signal strength of the XM radio signal
and adjust the position of the XM antenna accordingly.
Note:
If the signal level is 0%, make sure that the XM antenna
is connected properly.
XM Radio Messages
The following messages may appear while using XM
radio.
The XM antenna is not connected properly. Check the
antenna.
The XM user encryption code is being updated. Please
wait.
The signal is too weak. Check the antenna connection
and reposition it for the best reception.
The AV receiver is tuning or decoding audio or text data.
Please wait.
The XM channel you selected is not currently broadcast-
ing. Select another channel.
1 On the AV receiver, press the
[SETUP] button.
2 Use the Up and Down [ ]/[ ]
buttons to select “5. XM Setup,”
and then press the [ENTER] but-
ton.
3 Adjust the position of the XM
antenna so that the signal
strength is at least 70%.
The signal level range is 0% to 100%.
TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PHONES MULTl CH DVD VIDEO 1 VIDEO 2
VCR
VIDEO 3 TAPE TUNER CD VIDEO
VIDEO 3 INPUT
AUDIO L R
MASTER VOLUME
A SPEAKERS B
SETUP
, ENTER /
SETUP
TUNING / PRESET
ENTER