Connections, Connection to an audio system – Onkyo DV-BD507 User Manual
Page 16
16
EN
CONNECTIONS
Connection to an Audio System
•
When you change the connections, all devices should be turned off.
•
Refer to the manual accompanying external devices for more information.
2-Channel Analog Audio Connection
AUDIO IN
L
R
analog audio input jacks
RCA audio cable
audio
this unit
AUDIO OUTPUT (ANALOG L/R)
stereo system
Digital Audio Connection
DIGITAL AUDIO INPUT
COAXIAL
DIGITAL AUDIO INPUT
OPTICAL
digital audio
coaxial cable
audio
this unit
AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL)
AV receiver / amplifier
digital audio
optical cable
or
digital audio
coaxial input jack
digital audio
optical input jack
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
Note for Digital Audio Optical Cable
•
Digital audio optical cable may be damaged when bent at sharp angles. Endure cables are coiled in loops with a
diameter of 6 inches (15cm) or more when storing them.
•
Use a cable which is 9.8 feet (3m) or shorter.
•
Insert cable plugs firmly into the connectors when making connections.
•
If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.