Onkyo DV-BD507 - Manual (Page 39)

39 EN
FUNCTION SETUP
■ Digital out setting
When “Audio Mute” is selected in “HDMI Audio Out” setting, HDMI audio signal will be muted and the audio signals
output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks change depending on “Digital Out” setting.
Quick HDMI Audio Out Audio Mute Digital Out
Bitstream*:
When playing back discs recorded in Dolby Digital, Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD,
the corresponding core stream (Dolby Digital or DTS) are output.
LPCM:
LPCM signal will be output from AUDIO OUTPUT (DIGITAL OPTICAL / COAXIAL) jacks.
• This setting is not effective when the HDMI audio signal is output.
■ Speaker setting
This unit allows you to enjoy multi-channel surround sound such as 7.1-channel / 5.1-channel surround.
e.g.) basic layout with 7.1-channel surround system
Front speaker (left) Front speaker (right)
Center speaker
Subwoofer
Surround back speaker (right) Surround back speaker (left)
Surround speaker (left) Surround speaker (right)
To make the most of its feature, set up your speakers appropriately by referring to the following table.
Speaker setting options are available at the following locations;
<Speaker setting for the audio signal output from HDMI OUT jack>
(Available when you have HDMI cable connected to HDMI OUT jack)
Quick
HDMI Audio Out HDMI Multi(LPCM)
Custom Audio HDMI Audio Out HDMI Multi(LPCM)