Supplied accessories, For british models, Important – Onkyo AV RECEIVER TX-NR1009 User Manual

Page 4: For european models

Advertising

For British models

Replacement and mounting of an AC plug on the power
supply cord of this unit should be performed only by
qualified service personnel.

IMPORTANT

The wires in the mains lead are coloured in accordance
with the following code:

Blue: Neutral

Brown: Live

As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected to
the terminal which is marked with the letter L or coloured
red.

IMPORTANT

The plug is fitted with an appropriate fuse. If the fuse
needs to be replaced, the replacement fuse must approved
by ASTA or BSI to BS1362 and have the same ampere
rating as that indicated on the plug. Check for the ASTA
mark or the BSI mark on the body of the fuse.
If the power cord’s plug is not suitable for your socket
outlets, cut it off and fit a suitable plug. Fit a suitable fuse
in the plug.

For European Models

Supplied Accessories

Make sure you have the following accessories:

In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operations are the
same regardless of color.

■

Installing the batteries

Note

• If the remote controller

doesn’t work reliably,
try replacing the
batteries.

• Don’t mix new and old

batteries or different
types of batteries.

• If you intend not to use

the remote controller for
a long time, remove the batteries to prevent damage from
leakage or corrosion.

• Remove expired batteries as soon as possible to prevent damage

from leakage or corrosion.

■

Aiming the remote controller

To use the remote controller, point it at the AV receiver’s
remote control sensor, as shown below.
Transmission

Reception

Declaration of Conformity

We, ONKYO EUROPE

ELECTRONICS GmbH
LIEGNITZERSTRASSE 6,
82194 GROEBENZELL,
GERMANY

GROEBENZELL, GERMANY

ONKYO EUROPE ELECTRONICS GmbH

K. MIYAGI

declare in own responsibility, that the ONKYO product
described in this instruction manual is in compliance with the
corresponding technical standards such as EN60065,
EN55013, EN55020 and EN61000-3-2, -3-3.

Indoor FM antenna (

➔

page 21)

AM loop antenna (

Power cord (

Speaker cable labels (

➔

page 13)