Ohlins SHOCK ABSORBERS MOTORCYCLE ROAD & TRACK - Manual (Page 2)

2
Safety signals
Important information concerning safety is
distinguished in this manual by the
following notations:
The Safety alert symbol means:
Caution! Your safety is involved.
WARNING!
Failure to follow warning instructions
could result in severe or fatal injury
to anyone working with, inspecting or
using the suspension, or to bystanders.
CAUTION!
Caution indicates that special pre-
cautions must be taken to avoid dam-
age to the suspension.
NOTE!
This indicates information that is of
importance with regard to procedures.
Introduction
All of Öhlins advanced suspension products are
adepted to the brand and model. This means that
length, travel springaction and damping charac-
teristics, are tested individually just for the
motorcycle that you have decided to fit with
Öhlins suspension.
Before installation
Öhlins Racing AB can not be held responsible for
any damage whatsoever to shock absorber or
vehicle, or injury to persons, if the instructions for
fitting and maintenance are not followed exactly.
Similarly, the warranty will become null and void
if the instructions are not adhered to.
© Öhlins Racing AB.
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
Öhlins Racing AB is prohibited.
Printed in Sweden.
WARNING!
1. Installing a shock absorber, that is not
approved by the vehicle manufacturer, may
affect the stability of your vehicle. Öhlins
Racing AB cannot be held responsible for
any personal injury or damage whatsoever
that may occur after fitting the shock
absorber. Contact an Öhlins dealer or other
qualified person for advice.
2. Please study and make certain that you
fully understand all the mounting instructions
and the owners manuals before handling this
shock absorber kit. If you have any questions
regarding proper installation procedures,
contact an Öhlins dealer or other qualified
person.
3. The vehicle service manual must be
referred to when installing the Öhlins shock
absorber
NOTE
Öhlins products are subject to continual improve-
ment and development. Consequently, although
these instructions include the most up-to-date
information available at the time of printing, there
may be minor differences between your suspen-
sion and this manual. Please consult your Öhlins
dealer if you have any questions with regard to
the contents of the manual.
Contents
Saftey signals ................................................ 2
Tuning the suspension ................................... 3
Design ........................................................... 3
Function ........................................................ 4
Compression damping ................................ 4
Rebound damping ....................................... 4
Settings ......................................................... 5
Basic settings .............................................. 5
Setting the spring preload ............................. 5
Measuring .................................................... 5
Adjusting ...................................................... 6
Front fork spring .......................................... 6
Setting the damping ...................................... 7
Setting the shock absorber lenght ............... 7
Setting your motocycle .................................. 8
Start with rebound damping ........................ 8
Compression damping ................................ 8
Adjusting the shock absorber lenght ........... 9
Inspection and maintenance ....................... 10