Opticon LPR5627 User Manual
Page 60
Manual No. 25-ULPNR101-03; Feb, 2003 LPN5627 / LPR5627 Laser Fixed Mount
Scanner
Page 56
26. Redundant Decoding
The Number of Redundant Decodes determines how many times the scanner must decode a bar code
and obtain the same value before it will transmit the data. For example, if the redundancy is set at three
times, the scanner will not transmit data until it has decoded the bar code and obtained the same values
three times in succession. If it obtains the same value twice in a row, but a different value on the third
read attempt, it will not transmit. If it gets the same value three out of four times, it will not transmit. It
must receive three consecutive, identical reads.
Computer
Command
Function
/Description
Bar Code
Command
(Z7)
START/END
Programming Menu
-[8-
X0
Read bar code once
-Y1-
X1
Read bar code twice
-Y2- %
X2
Read bar code three times
-Y3-
X3
Read bar code four times
-Y!-
7R
Read bar code five times
-8S-
7S
Read bar code six times
-8T-