Omron Healthcare HJ-112 - Manual (Page 18)

18 Before Using the Unit
How to Set Time, Weight, and Stride Distance
•
Press the MEMORY/
▲ Button
to set the stride length.
Each time you press the Button, the display
of stride length will advance by 1''.
Keep pressing the Button to fast forward the
display of stride length by 1'.
If the display of stride length reaches 4'00'',
it will return to 1'00'.
If you press the RESET Button, the display
of stride length will be reset to 1'08''.
• If you leave the unit for more than 5
minutes without setting the stride
length, the screen will show the number
of steps while the display of stride
length remains unchanged.
•
Press the SET Button to change to the
display of number of steps.
Display of the number of steps and display
of time will be turned on.
Now all the settings are finished.
During the stride
length setting, the
displayed figures
will blink.
Example: To set the
stride length
to 1'10''
How to change time, weight, or stride distance after the
setting is completed:
1. Press the MODE Button to display the number of steps.
2. Press the SET Button for more than 1.5 seconds.
3. Change the setting.
• If an item that does not need to be changed is displayed, press the
SET Button, then the display will change to the next item to be set.