Monet, Architectural specification lighting controls – Sylvania D3208 User Manual

Page 11

Advertising
background image

4.25 (108.0)

4.72 (119.9)

MNI15-1LW

Architectural Specification Lighting Controls

C

11

For answers to technical questions, call Leviton’s Techline at 1-800-824-3005

MONET

®

LIGHTING CONTROLS • 600–1200 WATTS • 120–277V AC 60Hz

Commercial Grade Lighting Controls

MNI06-1LW

Monet Architectural Specification Grade Preset Controls
120V and 277V AC 60Hz

Low-profile Architectural Decora Digital Preset Slide Dimmers with LED locator light. Most
Monet dimmers provide single-pole (1 location) and 3-way (multi-location) control with
Switching Remote.

Incandescent 120V AC

U R

DESCRIPTION

CAT. NO.

RATING

COLOR CHANGE KIT

Monet Dimmer (narrow fin)

MNI06-1LW

600W

I, W, A, G, E, B

Monet Dimmer (narrow fin)

MNI10-1LW

1000W

I, W, A, G, E, B

Monet Dimmer (wide fin)

MNI15-1LW

1500W

I, W, A, G, E, B

Monet Incandescent Dimmer, Single-Pole,

MNI06-10W

600W

I, W, A, G, E

Unlighted (narrow fin)

Monet Incandescent Dimmer, Single-Pole,

MNI10-10W

1000W

I, W, A, G, E

Unlighted (narrow fin)

Low-Voltage 120V AC

U R

DESCRIPTION

CAT. NO.

RATING

COLOR CHANGE KIT

Monet Dimmer (narrow fin) Electronic

MNE04-1LW

400VA (320W)

I, W, A, G, E, B

Monet Dimmer (narrow fin) Magnetic

MNM06-1LW

600VA (450W)

I, W, A, G, E, B

Monet Dimmer (narrow fin) Magnetic

MNM10-1LW

1000VA (800W)

I, W, A, G, E, B

Monet Dimmer (wide fin) Magnetic

MNM15-1LW

1500VA (1200W) I, W, A, G, E, B

Mark 10

Fluorescent Ballast 120 and 277V AC

U R

For Advance Mark 10

Powerline fluorescent dimming ballasts.

DESCRIPTION

CAT. NO.

RATING

COLOR CHANGE KIT

Monet Mark 10 Fluorescent Dimmer (narrow fin)

MNX10-1LW

1000VA 120V AC I, W, A, G, E, B

Monet Mark 10 Fluorescent Dimmer (wide fin)

MNX15-1LW

1500VA 120V AC I, W, A, G, E, B

Monet Mark 10 277V Fluorescent Dimmer

MNX20-7LW

2000VA 277V AC I, W, A, G, E, B

(narrow fin)

Monet Mark 10 277V Fluorescent Dimmer

MNX30-7LW

3000VA 277V AC I, W, A, G, E, B

(wide fin)

Fan Speed Controls 120V AC

U R

DESCRIPTION

CAT. NO.

RATING

COLOR CHANGE KIT

Monet Fan Speed Control (narrow fin)

MNF07-1LW

7.5A 120V AC

I, W, A, G, E, B

Monet Fan Speed Control (wide fin)

MNF10-1LW

10A 120V AC

I, W, A, G, E, B

Monet Accessory Products

DESCRIPTION

CAT. NO.

RATING

COLOR CHANGE KIT

Monet Remote Non-Dimming Switching

MN00R-D0W

No load rating,

I, W, G, E, A

Unit for 3-Way Applications

use with

(Unlighted)

120V & 277V
Monet
dimmers only

Color Change Kits for MN00R-D0W Monet

MNK0R-00

I, W, G, E, A

3-Way Switching Unit

Color Change Kit for Narrow Fin Monet

MNKIT-SL

I, W, A, G, E, B

Lighted Controls

Color Change Kit for Wide Fin Monet

MNKIT-1L

I, W, A, G, E, B

Lighted Controls

Color Change Kit for Monet Unlighted Dimmers

MNKIT-S0

I, W, A, G, E

Monet Adapter Plate: Allows any Decora

MN0LA-000

Metal

strap-mount device to be ganged with

(large)

Heat Sink

either small or large-size Monet controls.

MN0SA-000

In multi-gang installations, must use on ends

(small)

Note: Mark 10

is a trademark of the Advance Transformer Company.

NOTE: Multi-gang wallplates are available for combining narrow and wide dimmers, with or without fins removed. Refer to page C13.

2.64 (67.1)

2.75 (69.9)

1.57

(39.9)

0.24

(6.10

4.72 (119.9)

CAUTION ON RETROFITS: When
retrofitting Mark 10

Powerline dim-

ming ballasts into fixtures that origi-
nally had Instant Start ballasts, the
sockets MUST be replaced with Rapid
Start sockets to allow proper dimmer
operation and prevent damage to the
dimming ballast. Refer to the instruc-
tions provided with the ballast and the
Leviton Mark 10

dimmer.

Monet Architectural Fin Width
Narrow: 2.75" (69.9 mm)
Wide: 4.25" (108.0 mm)

4.72 (119.9)

2.64 (67.1)

2.75 (69.9)

0.24

(6.1)

3.28 (83.3)

1.57

(39.9)

MN00R-D0W

Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included
with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly
connected to the load as indicated by the device’s wiring instructions.

See page C12 for Monet Specifications and Features

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Advertising