Sylvania D3208 - Manual (Page 14)

To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com
Architectural Specifications Lighting Controls
C
14
RENOIR ® LIGHTING CONTROLS • 800–2000 WATTS • 120 and 277V AC 60Hz
Commercial Grade Lighting Controls
Renoir Architectural Specification Preset Slide Dimmers
Renoir Incandescent 120V AC 60Hz Only
U R
DESCRIPTION CAT. NO. RATING COLOR*
Renoir Single-Pole (narrow fin) 80800 800W I, W, GY, B
Renoir 3-Way (narrow fin) 80800-3 800W I, W, GY, B
Renoir Single-Pole (narrow fin) 81000 1000W I, W, A, GY, B
Renoir Single-Pole, Illuminated (narrow fin) 81000-L 1000W I, W
Renoir 3-Way (narrow fin) 81000-3 1000W I, W, A, GY, B
Renoir 3-Way, Illuminated (narrow fin) 81000-L3 1000W I, W
Renoir Single-Pole (wide fin) 81500 1500W I, W, A, GY, B
Renoir 3-Way (wide fin) 81500-3 1500W I, W, A, GY, B
Renoir Single-Pole (wide fin) 82000 2000W I, W, A, GY, B
Renoir Single-Pole, Illuminated (wide fin) 82000-L 2000W I, W
Renoir 3-Way (wide fin) 82000-3 2000W I, W, A, GY
Renoir 3-Way, Illuminated (wide fin) 82000-L3 2000W I, W
Renoir Magnetic Low-Voltage 120V AC 60Hz Only
U R
DESCRIPTION CAT. NO. RATING COLOR*
Renoir Single Pole (narrow fin) 71111 1000VA (800W) I, W, GY, B
Renoir 3-Way (narrow fin) 71113 1000VA (800W) I, W, B
Renoir Single Pole (wide fin) 71511 1500VA (1200W) I, W
Renoir 3-Way (wide fin) 71513 1500VA (1200W) I
Renoir Fluorescent Dimming Ballasts 120V and 277V AC 60Hz Only
U R
DESCRIPTION CAT. NO. RATING COLOR*
Renoir Fluorescent Dimmer, 26666-31 1200VA (900W) 120V AC White
Single-Pole and 3-Way (wide-fin) Advance Mark 10 ™ Powerline
fluorescent dimming ballast
Renoir Fluorescent Dimmer, 26666-37 1200VA (900W) 277V AC White
Single-Pole and 3-Way (wide-fin) Advance Mark 10 ™ Powerline
fluorescent dimming ballast
Note: For complete information on installation, ganging and derating of High Wattage Dimmers, consult Leviton's Lighting
Controls Product Selection Guide or the Dimmer Instruction Sheet provided with the device.
When ganging these units, no derating is necessary except on those units which have had both sets of snap-off, fins
removed. These shall be derated as follows:
4.50 (114.3)
2.57 (65.3)
0.75
(19.1)
2.75 (69.9)
1.05
(26.6)
81000-W
4.50 (114.3)
4.50 (114.3)
82000-W
Maximum Load per Renoir Dimmer Multi-Gang with Fins Broken Off
Cat. No. Single 2-Gang More Than
2-Gang
26666-31 1200VA 1100VA 1050VA
26666-37 1200VA 1200VA 1200VA
71111/3 1000VA (800W) 800VA (800W) 700VA (640W)
71511/3 1500VA (1200W) 1300VA (1200W) 1100VA (1040W)
80800 800W 700W 600W
81000 1000W 800W 700W
81500 1500W 1300W 1000W
82000 2000W 1800W 1500W
SPECIFICATIONS AND FEATURES
• ON/OFF rocker switch turns lights ON at last selected
brightness level
• Smooth-action, linear slide control for easy, precise
operation
• Available in single-pole (one location) and 3-way
(multi-location) versions. 3-way dimmer is used with
standard 3-way ON/OFF switch
• Decora-styling coordinates with Leviton’s extensive
line of Decora devices
• Decora-style screwless snap-on wallplates present an
attractive appearance in any application
• Slim, compact housing easily fits in standard wall
boxes
• Fins are easily removed for multi-gang applications
• Large radio/TV interference filter
• Illuminated versions available
TESTING AND CODE COMPLIANCE
• UL Listed (File #E-31373)
• CSA Certified (File #LR-3413)
• Backed by a Limited Five-Year Warranty
*COLOR
Add suffix to catalog numbers as follows for color
selection: Ivory (-I) White (-W), Almond (A), Gray (-GY),
Brown (-B)
MATERIAL CHARACTERISTICS
Environmental: Flammability UL-94, V2 Rating
Operating Temperature: 32°F to 130°F
Renoir Architectural Fin Width
Narrow: 2.75" (69.9 mm)
Wide: 4.50" (108.0 mm)
CAUTION ON RETROFITS: When
retrofitting Mark 10
™ Powerline
dimming ballasts into fixtures that
originally had Instant Start ballasts,
the sockets MUST be replaced with
Rapid Start sockets to allow proper
dimmer operation and prevent
damage to the dimming ballast.
Refer to the instructions provided
with the ballast and the Leviton
Mark 10
™ dimmer.
NOTE: For fin removal and switchbox requirements for ganging Leviton Renoir dimmers, refer to page C17.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to
each phase. Consult Leviton Techline if problems persist.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com