Onkyo CR-515 CR-315 - Manual (Page 35)

35
Playing CDs—Continued
With memory playback, you can create a playlist of up
to 25 tracks.
Memory playback can be set only when the input source
is set to CD and playback is stopped.
Selecting Other Tracks During Memory Playback
To select other playlist tracks during memory playback,
use the remote controller’s Previous and Next
[
]/[ ] buttons.
Checking What’s on the Playlist
To check what tracks are on the playlist, with playback
stopped, use the Fast Reverse and Fast Forward
[
]/[ ] buttons to scroll through the playlist.
Removing Tracks from the Playlist
• While memory playback is stopped, press the
[CLEAR] button. Each press removes the last track
from the playlist.
• The playlist will be deleted when you cancel memory
playback, select random playback, turn off the CD
receiver, or remove the CD.
Memory Playback
1 Press the [YES/MODE] button
repeatedly until the MEMORY indi-
cator appears.
2 Use the Previous and Next
[
]/[ ] buttons to select the
first track you want to add to the
playlist, and then press [ENTER].
Repeat this step to add additional tracks
to the playlist.
You can also use the number buttons on
the remote controller to select tracks.
On the CR-515, you can also use the
multi control to add tracks to the playlist.
Turn the multi control to select a track,
and then push it for ENTER.
To select MP3 files for memory
playback:
In Navigation mode, use steps 1–4 on
page 32. In All Folder mode, use steps
1–4 on page 33.
/
YES/MODE
MENU/NO/
CLEAR
ENTER
/
Number buttons
(see page 31)
(These buttons do
nothing during
memory playback)
MEMORY indicator
Track to be added
to the playlist Total time of playlist
To remove tracks from the playlist:
Press the [CLEAR] button. Each press
removes the last track from the playlist.
Notes:
• If the total playing time is more than
99 minutes and 59 seconds, “– –:– –”
is displayed.
• You can add up to 25 tracks to the
playlist. If you try to add more, the
message “Memory Full” appears.
3 To start memory playback, press
the Play [
] button.
On the CD receiver, press the Play/Pause
[
] button to start memory play-
back.
Track currently playing
/