Omron Healthcare GO SMART HJ-203 - Manual (Page 11)

 
Press to change the display
Step count display
distance display
Calories display
Fat burned display
Time display
ReAdING THe ACTIvITy
TRACkeR dISPLAy
MeMORy FUNCTION
This unit automatically stores 7 days of measurements
for steps, distance, calories burned and fat burned
The clock automatically resets itself at midnight to
begin measuring the next day’s activity level
 Press to select the type of
measurement you want to see (steps,
distance, etc).
2 Press to view the results (days -) in
memory.
The display changes with each press of as
shown below
• Keep
pressed to automatically change the
display until the current display is displayed
• Press to return to the current display
NOTeS:
• Only one session of information from the
Activity Tracker/Activity Measurement Mode
is stored in memory (refer to page 16)
• You cannot use the memory function when
using activity measurement mode (refer to
page 16)
• If no buttons are pressed for more than 1 minute,
the display returns to the current display
Make sure the time is correctly set in the unit
Current display Activity measurement
mode memory
Memory for 1 to
7 days ago