Omron Healthcare GO SMART HJ-203 - Manual (Page 6)

0 
Stride length measurement
Even though this unit can automatically set your
stride length based on your height, you can measure
and change as you like Just follow these directions
Measure your stride length before setting the unit
How to measure your stride length
. Walk 0 steps with your normal stride as
illustrated below.
2. Measure the distance from START to eNd
in inches.
3. Calculate your stride length by dividing
the total distance by 0.
Example:
Total distance = 320''
320 ÷ 10 = 32 inches (2 feet 8 inches)
SeTTINGS BATTeRy LIFe
If the symbol blinks or appears on the display,
replace the battery with a new (CR2032) battery
If the battery is removed, the settings and all
measurement values will be deleted Please reset
the settings (refer to page 8)
NOTeS:
• If you want to keep any of the measurement
values, make a note of them before removing
the battery
• The supplied battery is for trial use The battery
life may be shorter