Onkyo A-933 - Manual (Page 19)

19
Enjoying Audio Sources —Continued
You can use the A-933 as power amplifier with a sepa-
rate preamp. See page 15 for connection information.
Notes:
• You can record on a recorder that’s connected to the
MD OUT or TAPE/CDR OUT L/R jacks.
• The tone controls have no effect on the signal being
recorded.
• When using the A-933 as a power amplifier (MAIN
IN function), recording is not possible.
• For information on one-touch CD dubbing, individual
CD track dubbing, and timed recording with Onkyo
Separate Collection components, see page 10.
Using the MAIN IN Function
1 Press the [MAIN IN] button for 3
seconds until the MAIN IN indica-
tor lights up.
The MAIN IN function comes on and
the MAIN IN indicator lights up blue.
While the MAIN IN function is on,
only audio from components con-
nected to the preamp can be output.
To turn the MAIN IN function off,
press the [MAIN IN] button for 3 sec-
onds until the MAIN IN indicator goes
off.
Notes:
• Do not connect a component that
does not have an output volume con-
trol to the MAIN IN jacks and use the
MAIN IN function, because the
sound will be output at maximum
volume and may damage the A-933
and your speakers.
• While the MAIN IN function is on,
the A-933’s Volume control has no
effect. Before you turn off the
MAIN IN function, make sure that
the Volume control is not turned up
high, to prevent any loud surprises.
• While the MAIN IN function in on,
the remote controller and the follow-
ing A-933 functions are disabled:
Volume control, Muting,
system
functions, Tone/Direct function, sub-
woofer output, and Recording. Some
of these functions can be performed
on the connected preamp.
TUNER
PHONO
C D
M D TAPE /CDR LINE
STANDBY/ON
POWER
PHONES TO N E ( R ) DIRECT (G ) MAIN IN
SUPER BASS BASS
MAX
TREBLE
SPEAKERS B A OFF ON
STANDBY(R) ON(G)
MAIN IN
MAIN IN
Recording
1 Use the input selector to select
the component that you want to
record from.
2 Prepare the recorder:
• Set the recorder so that it’s ready for
recording.
• If necessary, adjust the recording
level on the recorder.
• See the recorder’s manual for more
information.
3 Start playback on the component
selected in step 1.
Note:
If you select another input source dur-
ing recording, the newly selected input
source will be recorded.
Unless you have the full consent of the
copyright holder, copyright laws prohibit
using your recordings for anything other
than personal enjoyment!
TUNER
PHONO
C D
M D TAPE /CDR LINE
STANDBY/ON
POWER
PHONES TO N E ( R ) DIRECT (G ) MAIN IN
SUPER BASS BASS
MAX
TREBLE
SPEAKERS B A OFF ON
STANDBY(R) ON(G)
Input selector
TUNER
PHONO
C D
M D
TAPE /CDR LINE