Ovideon LC2000 - Manual (Page 20)

Adjusting Settings
14
EN
GLISH
3.5.2 Using Quick Channels
The quick channel function lets you
assign ten channels that can be accessed
by the quick channel keys on the
remote control.
Press PRG/CH / in the QUICK
CH block on the remote control to
switch between assigned quick
channels.
Assigning Quick Channels
1
First choose a channel you want to
add to the quick channels by using
the normal PRG/CH
/ keys
or by entering a channel number
directly with the number keys on
the remote control.
2
Press the MEM key in the quick channel block on the remote control.
3
Use the number keys to assign a number between 0 and 9 to the
current channel.
4
Wait five seconds. The quick channel screen disappears and the new
quick channel assignment is complete.
Deleting Quick Channels
1
First press the DEL key in the QUICK CH block on the remote
control.
2
The quick channel settings appear on the screen. Press the number
key (0 to 9) of the channel you want to delete. The setting for this
quick channel changes to “OFF”.
3
Wait five seconds. The quick channel screen disappears and the
quick channel is deleted.
Quick
Channel
Block