Ovideon LC2000 - Manual (Page 24)

Adjusting Settings
18
EN
GLISH
3.6.3 Adjusting Geometric Settings
There are four settings related to
VGA signal and screen position-
ing that can be adjusted when the
LCD display is in VGA mode:
clock, phase, h-position, and v-
position. Each of these can be
adjusted on the “Geometric”
page of the OSD menu system
when the LCD display is in VGA
display mode.
3.7 Adjusting Volume
Use VOL+/– to increase or decrease
the volume.
Press MUTE to turn the sound off
completely. The mute function is
released automatically by pressing
MUTE again, by changing the vol-
ume or main display source, or by
turning the power on or off.
Setting Description
Clock
Adjusts pixel alignment to help stabilize the
VGA display.
Phase
Adjusts the focus and clarity of the VGA
display.
H-Position
(Horizontal Position)
Centers the image on the display horizon-
tally.
V-Position
(Vertical Position)
Centers the image on the display vertically.
PHASE
H-POSITION
RESET /
CLOCK
AUTO
128
16
113
GEOMETRIC
V-POSITION 30
18 18 18 18 18 18 18 18 18 18 18
18 18 18 18 18 18 18 18 18 18 18