OTC Wireless WIJET.G 802.11G - Manual (Page 11)

WiJET.G Technical Manual 8
Existing 802.11b/g channels detected in use, but there is no interference. Your
connection to the WiJET.G should be smooth and error free.
RF activities detected on other channels (1, 5, 8, 11). WARNING:
Interference.
Existing channels detected and interference found. The WiJET.G is in a RF noisy
environment, you may have trouble connecting and maintaining connections to
the WiJET.G even if a connection can be made.
Note: WiJET.G updates this information whenever the banner page
appears. In a noisy environment, channel information might get
outdated quickly since the WiJET.G does not monitor channels
continuously.
Once you have turned the WiJET.G on and noted the above information, you can now
configure your computer to connect to the WiJET.G.
3.3 Configuring Computer to Control WiJET.G
Before starting the Presentation Session Manager, the network interface of the
computer must have a valid IP address. For computers running DHCP client mode
while DHCP server is unavailable, it may take a few moments for the computers to
obtain a system IP address. If users cannot obtain a valid IP address for the network
interface, please refer to any network administration references for how to assign IP
address to a network interface/connection.
NOTE:
The computer’s network interface must have a valid IP address before PSM
starts.
3.4 Starting WiJET.G Presentation Session Manager
Start the WiJET.G Presentation Session Manager (PSM) to control the WiJET.G. There
are two ways to run the WiJET.G PSM. One is to run the WiJET.G PSM directly from
the utility CD while the other is to run a locally installed WiJET.G PSM from a hard-
drive.
To run the PSM directly from the utility CD, insert the installation CD into CD-Drive and
click the “Run from CD” button in an auto-start window. If the auto-run window does not
show up automatically, open My Computer and explore on the CD-Drive where the
installation CD is inserted and execute “psm.exe”.
To run the locally installed PSM from a hard-drive, start WiJET.G PSM program located
under the Programs Folder in the Windows Start menu, WiJET.G Utility as shown in
Figure 3.2. You can also double-click on the WiJET.G shortcut on Windows desktop to
start PSM.