OTC Wireless WIJET.G 802.11G User Manual
Page 22
WiJET.G Technical Manual
19
Figure 4.4 Configuration screen
Radio mode:
This pull-down menu allows the WiJET.G to switch between the Access
Point and Infrastructure station modes. While running the Infrastructure station, make
sure the operation mode is set to “Manual” and the SSID/network name matches that of
the existing wireless network.
WEP enabled:
This check box allows users to enable or disable WEP feature. The
WiJET.G currently supports only the default (shared) WEP key scheme defined in the
802.11 standard, not the mapped key scheme. A set of four keys needs to be created
in the default-key scheme.
Authentication Type:
When the “Open system” option is chosen, no encryption is
applied to the exchanged packets between this Station radio and another radio.
Communication with another radio (a station or an AP), however, can be successful