Before using this product, Continued, Using the remote controller – Onkyo A-5VL User Manual

Page 9

Advertising
background image

Before Using This Product

—Continued

9

TUNER mode

Use this mode to control an

connected Onkyo

tuner.

BAND button
Use this button to switch the reception band (FM/
AM).

MODE button

Use this button to switch the reception mode when
receiving FM broadcasts.

PRESET button

Use this button to select a preset broadcast station.

CD Mode

Use this mode to control a CD player.

button

Use this button to pause playback.

button

Use this button to skip to the beginning of the track
being played back.

button

Use this button to play back.

button

Use this button to skip to the beginning of the next
track.

button

Use this button to fast reverse.

button

Use this button to stop playback.

button

Use this button to fast forward.

Common to All Modes

VOLUME button
Use this button to adjust the volume.

MUTING button

Temporarily set the audio to the minimum level.
Press it again to return to the original volume.

Using the Remote Controller

Point the remote controller toward the remote control
sensor, within the field shown in the drawing.

- Do not expose the remote control sensor to strong

light, such as direct sunlight or inverted fluorescent
light.

- Using the unit near equipment that emits infrared

beams or with another remote controller may cause
malfunctions.

- Make sure that the audio rack does not have colored

glass, as this could prevent the remote controller
from functioning properly.

- The remote controller will not function if there are

obstacles between it and the remote control sensor.

- Do not place objects such as books on top of the

remote controller. Doing so could depress the
buttons on the remote continually and drain the
batteries.

Approx.5m
(16 feet)

Advertising