Omega Vehicle Security 850i - Manual (Page 16)

Page 35
Feature #14 Ignition Activated Vehicle Recovery
(Factory Default Setting Off)
The Vehicle Recovery feature activates the system into an alarm condition
automatically in the event that you are forced from your car. “Ignition Activated”
Vehicle Recovery is one three methods of activating this feature, which is
explained on page 27.
Programming Ignition Activated Vehicle Recovery:
Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and
released fourteen times. The system’s response will be fourteen siren chirps, and
the Status Light flashing fourteen times, pausing, then repeating. Within 10
seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to
turn on Ignition Activated Vehicle Recovery (the siren will chirp once) or the
"Disarm/Unlock" button to turn this feature off (the siren will chirp twice).
Feature #16 Remote Activated Vehicle Recovery
(Factory Default Setting Off)
This form of the Vehicle Recovery feature gives you the option of activating
Feature #15 Door Activated Vehicle Recovery
(Factory Default Setting Off)
The Vehicle Recovery feature activates the system into an alarm condition
automatically in the event that you are forced from your car. “Door Activated”
Vehicle Recovery is one three methods of activating this feature, which is
explained on page 27.
Programming Door Activated Vehicle Recovery:
Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and
released fifteen times. The system’s response will be fifteen siren chirps, and
the Status Light flashing fifteen times, pausing, then repeating. Within 10
seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to
turn on the Door Activated Vehicle Recovery feature (the siren will chirp once)
or the "Disarm/Unlock" button to turn this feature off (the siren will chirp twice).
Programming Doors Lock With Automatic Rearming:
Follow Steps 1 to 4 on page 28; at Step 4 the Valet Switch will be pressed and
released thirteen times. The system’s response will be thirteen siren chirps, and
the Status Light flashing thirteen times, pausing, then repeating. Within 10
seconds, press and release the transmitter/transceiver’s "Arm/Lock" button to
turn this feature on (the siren will chirp once) or the "Disarm/Unlock" button to
turn this feature off (the siren will chirp twice).
Hold 3
seconds
Hold 3
seconds
OR
ENHANCED REMOTE PANIC
To Activate “Enhanced Remote Panic”:
THE SIREN SOUNDS THE PARKING LIGHTS
WILL FLASH
Hold 3
seconds
Hold 3
seconds
OR
THE DOORS WILL
LOCK OR UNLOCK*
SecureCode:
SecureCode is a user-programmable custom Emergency Override required
two stages of valet switch presses. The procedure for Emergency Override with
a customized SecureCode is:
Page 14
* An optional doorlock interface must be installed
Step 1 With the system in the armed condition, enter the vehicle via the driver's
door (be ready for the system to activate to an alarm condition).
Step 2 Using the ignition key, turn the vehicle’s ignition switch on.
Step 3 Within 5 seconds press and release the Valet Switch the same number
of times that have been programmed for stage #1.
Step 4 After a few seconds, the siren will stop sounding, chirp once, and then
resume sounding.
Step 5 Now, within 5 seconds press and release the Valet Switch the same
number of times that have been programmed for stage #2. Within a few
seconds the siren will stop sounding, and the unit will disarm.
Press & Hold for 3 Seconds the “Arm/Lock” Button ( )
OR the “Disarm/Unlock” Button ( )
U
J
If a customized SecureCode has been programmed, the system will disarm a few
seconds after the correct entry, and if an incorrect entry is made, the system will
not disarm. See page 30 for more detailed explanation of SecureCode, and how
to program a customized SecureCode.
Valet Mode (page 23-24), which prevents the system from performing any
automatic arming operations which may be otherwise programmed to occur.