Replacing batteries, Using the ac adapter – Olympus DS2000 User Manual

Page 11

Advertising
background image

11

Replacing Batteries

The battery indicator on the display changes
as the batteries lose power.

When the batteries are too weak, the recorder
shuts down and “BATTERY LOW” appears on
the display.
When

appears on the display, replace

the batteries as soon as possible. AAA alkaline
batteries* are recommended.

* The two AAA alkaline batteries provide

approximately 11 hours of continuous recording and
playback. Battery life depends on the operating
environment and other conditions.

Notes

Be sure to stop the recorder before replacing

the batteries. Unloading the batteries while the
recorder is recording, erasing or otherwise
accessing an audio file may corrupt the file.

• Be sure to replace both batteries at the same time.
Never mix old and new batteries, or batteries

of different types and/or brands.

• If it takes longer than 3 minutes to replace dead

batteries, the internal rechargeable backup battery
will be exhausted, so you may have to reset the
time when you load fresh batteries.

• Remove the batteries if you are not going to use

the recorder for an extended period of time.

Using the AC Adapter

“BATTERY

LOW”

Replacing Batteries/Using the

AC Adapter

Plug the optional AC adapter (Olympus Model
A321 or A322) into household power outlet and
connect the power plug to the recorder’s power
connector (DC 3 V) as shown in the illustration.
Always stop recording before connection.
Otherwise it may not be possible to play back
the voice data being recorded.

MEN

U

INDE

X

REC

STO

P

ERASE

Always stop recording before connection

or disconnection.

When the AC adapter is not in use,

disconnect the power supply plug from
the power outlet.

Use only the correct power supply voltage

as indicated on the adapter.

Do not use the AC adapter when

connecting the recorder to the USB port.

Advertising
This manual is related to the following products: