Oki C 130n - Manual (Page 153)

153 - C130n User’s Guide
Error Messages: Warning
PROCESSING The printer is processing data. No action needed.
Oki C130
STARTING PRINTER
The printer is being started up.
PORT AUTH ACTIVE The IEEE802.1x port is being
authorized.
WARMING UP The printer is warming up.
Message Meaning What to Do
CHECK TRAY1
PAPER
(Displaying alternately)
PRESS
MENU/SELECT
Tray 1 is empty. Load the media into
Tray 1, and then press
the Enter key.
Media has misfed in
Tray 1. Remove the misfed
media.
I/C END The imaging cartridge
has reached the end
of its life. Replace the imaging
cartridge.
I/C LIFE END
I/C LOW The imaging cartridge
is near the end of its
life. Prepare a new imaging
cartridge.
TRAY 2 IS EMPTY Tray 2 is empty. Load the media into
Tray 2.
TRAY 2 OPEN Tray 2 cassette is not
installed or is not fully
closed. Close Tray 2 or print
from another tray.
VIDEO I/F ERROR A video interface
error occurred in the
printer. Turn off the printer. After
a few seconds, turn on
the printer.
X INCORRECT The X toner cartridge
is an unapproved
type. Install a genuine Oki
toner cartridge of the
appropriate type.
X MEMORY ERROR A memory error
occurred in the toner
cartridge. Re-install the specified
toner cartridge.
Message Meaning What to Do