Thick stock – Oki C 130n User Manual
Page 55
55 - C130n User’s Guide
"
Dusty
"
Wet (or damp)
Note
Keep media between 15% and 85% relative humidity. Toner does
not adhere well to moist or wet paper.
"
Layered
"
Adhesive
"
Folded, creased, curled, embossed, warped, or wrinkled
"
Perforated, three-hole punched, or torn
"
Too slick, too coarse, or too textured
"
Different in texture (roughness) on the front and back
"
Too thin or too thick
"
Stuck together with static electricity
"
Composed of foil or gilt; too luminous
"
Heat sensitive or cannot withstand the fusing temperature (180°C
[356°F])
"
Irregularly shaped (not rectangular or not cut at right angles)
"
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
"
Acidic
"
Any other media that is not approved
Thick Stock
Paper thicker than 90 g/m
2
(24 lb bond) is referred to as thick stock. Test all
thick stock to ensure acceptable performance and to ensure that the image
does not shift.
DO NOT use thick stock that is
"
Mixed with any other media in Tray 1 (as this will cause printer
misfeeding)
Capacity
Tray 1
Up to 50 thick stock sheets, depending on
their thickness
Tray 2
Not supported
Orientation Face up
Driver
Media Type
Thick 1 (91 to163 g/m
2
)
Thick 2 (164 to 209 g/m
2
)
Weight
91 to 209 g/m² (25 to 55.9 lb)
Duplexing
Not supported