Oki C5550 MFP - Manual (Page 15)

15
• English
Walk-up Operation
Fax
Your system has multiple fax modes,
including
• Basic Faxing (see below)
• Delayed Send Faxing (see page
16)
• Manual Feed Faxing (see page 16)
• Poll Receive Faxing (see page 17)
• Broadcast Faxing (see page 17)
Basic Faxing
Note
These instructions assume that all
needed basic data (e.g., date and
time) has already been
programmed into the system.
1. Load the document (see page
11).
2. Press the F
AX
key.
3. Enter the destination fax
number:
4. Enter the destination fax
number:
5. Optional: Press the Additional
Settings key and use the arrow
and OK keys to make additional
fax mode settings*. Press the
R
ETURN
( ) key to go back to
the main fax screen.
6. Press the M
ONO
key to start
scanning.
• Use the numeric keypad to type
in the number, or
• Press the appropriate
pre-programmed One Touch key,
or
• Search the phone book by
pressing the A
DDRESS
B
OOK
key
– once for speed dial entries or
– twice for group dial entries.
Use the arrow keys to navigate.
Press the OK key when done.
*Additional Fax Settings
The default setting is in bold italic.
Quality Standard, Fine,
ExtraFine, Photo
Change the setting to
adjust the quality of the
scanned image.
Density -2, -1, 0, 1, 2
Set the print density.
Document
Size A4, Letter, Legal.
Delayed send Real time,
Manual Feed Off, On
Poll Receive Off, On
Overseas
Mode Off, On
Change the setting to On
to avoid transmission
problems when faxing
overseas.