Oki C5550 MFP - Manual (Page 8)

8
• English
Walk-up Operation
Scanner Control Panel (cont.)
Note:
For more detailed information, see
the on-line User’s Guide or check
with your System Administrator.
1 Copy Count Display
Indicates the number of copies
selected.
2 Copy Mode Key
Used to select Copy mode (also
the default working mode).
3 Send Mode Key
Used to select Send mode .
4 Fax Mode Key
Used to select Fax mode.
5 Return Key
Used to cancel selections and go
back to the top level of the setting.
The key is also used to cancel any
previous input.
6 Arrow Keys
Used to move the cursor in the
LCD up/down/left/right. The up/
down keys are used to switch
function indication.
7 OK Key
Used to select and confirm current
setting selections.
8 Additional Settings
Used to execute additional settings
of “Copy” and “Send” modes. (The
settings are available only for
three minutes. After three
minutes, the settings will
automatically return to the default
value).
9 FTP Address
Used to indicate the stored FTP
address for the “Send” function.
This key is only available in the
“Send” mode.
10 Address Book
Used to indicate the stored E-mail
addresses for the Send function.
Also used to indicate the stored
Fax numbers for the fax function.
Press once to view speed dial
numbers, press twice to view
group dial numbers.