Outlaw Audio 1070 - Manual (Page 44)

 Outlaw Audio
Owner’s Manual
Operation
After you have programmed the remote control for your equipment, use the
following procedures to operate the components of your home entertainment
system:
To operate a system component that you have programmed:
1. On the Model 1070 remote, press the button near the top of the
remote for the device you want to control (CBL, AUX, VCR, TV, SAT,
CD, or AMP)
. Aim the remote control at the device and press the POWER button
to turn on the device.
. Press the buttons that send out the commands you desire.
NOTE: Some audio/video devices have separate buttons for POWER
ON and POWER OFF. To operate these devices on the remote, press
the corresponding device button to turn the equipment ON and press
the POWER button to turn the equipment OFF.
Please try all the functions of this remote control with your equipment. The most
common functions are labeled on the remote. However, some of the secondary
functions might be stored under a button that has a different name from the
one on your original remote control.
Source Selection Buttons
Pressing a source button (VIDEO 1, DVD, etc.) at the bottom of the remote
control performs the following functions:

If the Model 1070 is in Standby mode, powers up the unit.

Selects that source on the Model 1070.
Backlighting
Pressing any button on the Model 1070 remote illuminates all the buttons on
the remote control for about 5 seconds. The backlight is extended an additional
5 seconds with any button press while the backlight is on.
Setup Codes
CABLE CONVERTERS
Manufacturer/Brand Setup Code Number
ABC 0003, 0017
Americast 0899
Bell South 0899
General Instrument 0276, 0476, 0810
GoldStar 0144
Hamlin 0009, 0273
jerrold 0003, 0276, 0476, 0810
Memorex 0000
Motorola 1106
Pace 0237
Panasonic 0107, 0000
Paragon 0000
Philips 0305, 0317
Pioneer 0144, 0533, 0877
Pulsar 0000
Quasar 0000
Regal 0273, 0279
Bunco 0000
Samsung 0144
Scientific Atlanta 0017, 0477, 0877
Starcom 0003
Toshiba 0000
Zenith 0000, 0525, 0899
CD PLAYERS
Manufacturer/Brand Setup Code Number
Aiwa 0157
Burmester 0420
Cal. Audio Labs 0029
Carver 0157, 0179
DKK 0000
Demon 0003, 0873
Emerson 0305
Fisher 0179
Garrard 0420
Genexxa 0032, 0305
Harman/Kardon 0157, 0173
Hitachi 0032
jVC 0072
Kenwood 0028, 0190, 0826, 0037, 0626, 0681
Krell 0157
LX. 0305
Linn 0157
Setup Codes