Oregon MP 210 - Manual (Page 21)

EN
18
SOFTWARE
The MP210 software does not automatically begin when you insert
the CD.
You may need to start the installation process manually.
1. Double click the "My Computer" icon on the Windows desktop.
2. Double Click the drive that contains the CD-ROM.
3. Follow the on-screen instructions to complete the installation
process.
CAUTION
In case of electrostatic discharge, the product may not function properly
and will require a manual reset. After resetting the unit, data stored
will remain intact; if a message was being recorded, it will be lost.
TECHNICAL SPECIFICATIONS
Built-in Flash Memory: 128MB, 256MB or 512MB
(refer to indication on packing)
Dimensions: 91mm (L) x 53mm (W) x 6.6mm (T)
Weight: 40g (with battery)
LCD Dimensions: 23mm (L) x 16mm (W)
FM Radio Frequency: 87.5~108MHz
Radio Preset Channels: 30
Volume level: 0-30
Earphone Out: 10mW max. / channel (16 Ohm)
Frequency Range: 20Hz~20000Hz
Signal to Noise Ratio: > 90dB (earphones)
Language Display: Six-language filename and menu
display (English, French, German,
Italian, Spanish, Portuguese)
Your computer does not locate your player.
Check to make sure the USB cable is connected properly. If you are
using Win98SE, make sure you have installed the driver software.
Cannot store any more files on the player.
The memory may be full. Delete files to make some room.
MP210 Eng R4 op 7/22/04, 11:17 PM 18