Oregon MP 210 - Manual (Page 7)

EN
4
NOTE: Make sure you turn off the player before connecting to the PC.
Once connected the player's built-in battery will automatically begin
charging. "READY" will show on the LCD.
When the battery is fully charged after approximately 2-3 hours on a
continuous charge, the battery icon shows
. Please disconnect
the player when charging is finished unless you are transferring files.
The battery status indicators are as follows:
NOTE: When the low battery indicator shows , recharge the battery
as soon as possible. When the battery icon shows , this indicates
the battery is about to run out of power within a few seconds.
NOTE: Charging time may very depending on the computer's USB
usage status.
FILE TRANSFER
After connecting your MP3 player to the computer, the computer will
detect and identify the device as a removable storage drive, allowing
you to drag and drop all forms of data files between your computer
and your player.
1. Double click the My Computer icon.
2. Double click the drive letter (i.e. Removable Disk (H:)) of your
player assigned by the computer.
3. Drag and drop the file(s) you wish to copy from your computer
onto your player.
NOTE: You will not be able to view or play any of the stored data
unless it is one of the supported MP3 (MPEG-1, Audio Layer 3), WMA
(Windows Media Audio), or WAV (IM ADPCM) audio formats.
Low Medium Full
MP210 Eng R4 op 7/22/04, 11:17 PM 4