Omega FMA 4000 User Manual
Page 32
28
8.3
ASCII Commands Set
OMEGA FMA 4000 SOFTW
ARE INTERF
ACE COMMANDS
COMMAND
NAME
DESCRIPTION
No.
COMMAND SYNT
A
X
Command
Argument 1
Argument 2
Argument 3
Argument 4
Response
Flow
Requests the current flow
sensor reading in current EU
1
F
<V
alue> (Actual flow in
current engineering units)
Diagnostic
Enable / Disable LCD
Diagnostic messages (only
for LCD option).
Request current status of
the Diagnostic events, LED
status and LCD diagnostic
mode (enabled/disabled).
2
D
E
(enable LCD
** Diagnostic Messages)
D:E
D
(disable LCD
** Diagnostic Messages)
D:D
NO ARGUMENT
(read current status of
the diagnostic word)
D:0x0,L:9,E
0x0 – diagnostic word
9 - current LED status
E - LCD mode (enabled)
Roll back to
N
2
feature.
Enable / Disable Roll back
to N
2
feature.
3
N
E
(enable Roll back to N
2
)
N:E
D
(enable Roll back to N
2
)*
N:D
NO ARGUMENT
(read current mode of
the N2 Roll back )
N:D
Or
N:E
Gas Select
Selects one of the ten
primar
y gas calibration
tables to use. T
ables are
entered via the MEM
commands at time of
calibration.
4
G
0 (gas 0)*
to
9 (gas 9)
G0 through G9,
<Gas Name>
NO ARGUMENT
(read status)
G0 through G9,
<Gas Name>
Note: An “*” indicates power up default settings. An “**” indicates optional feature not available on all models.