System alignment – OPPO Digital Model PRO900X User Manual

Page 24

Advertising
background image

SYSTEM ALIGNMENT

P A G E 2 4

3276-A

IV. Final Detailed Geometry/Convergence Setup

Use the video patterns generated by the customer’s signal source
for final alignment. If this is not possible, use the internal cross
hatch pattern only to do the geometry and convergence. The cus-
tomer’s signal must be used for blanking, size, centering and
phase.
1. Green Geometry Setup

a. Return to the geometry and convergence modes and set up

the Green display with precision. Each step should be done
by measuring the display and not guess work.

b. Now store the Green setup.

2. Red to Green Convergence Setup

a. Return to the convergence mode and set up the red display

with precision. Converge the Red display to the Green
display using all necessary controls.

b. Now store the Red setup.

3. Blue to Green Convergence Setup

a. Return to the convergence mode and set up the Blue display

with precision. Converge the Red display to the Green
display using all necessary controls.

b. Now store the Blue setup.

4. Red to Green to Blue Convergence Setup

a. Return to the convergence mode and set up the Red and

Blue display with precision. Converge the Red display to the
Green display using all necessary controls.

b. Now store the completed setup.

5. Video Blanking Setup Using the Customer’s Signal

a. Access the Blanking/Phase feature of the setup menu.
b. Select the TOP/LEFT BLANKING feature.
c. Using the small arrows adjust the top and left edges

(increasing the setting number) until the edge begins to
crop or frame the video. Decease the number until the
cropping just stops. Now decease the number value two
more.

d. Select the BOTTOM/RIGHT BLANKING feature, repeat step c.
e. Press ADJ TOGGLE and save the settings.

V. Geometry/Convergence of Other Aspect Ratios

1. Geometry/Convergence setup must be accomplished for each

required aspect ratio of each signal format used (Video,
S-Video, RGB VGA400, VGA480, SVGA, etc.).

2. Each of the ten standard signal format memory “custom” loca

tions also has a “custom” location for each of associated
aspect ratios.

3. The five “customer” format memory locations also store the

aspect ratio information separately.

4. RGB sources use the 4 x 3, letter box, or 16 x 9 aspect ratios.

5. Video and S-Video sources use the 4 x 3, letter box,

Compressed, and 16 x 9 aspect ratios.

Advertising