OPPO Digital Model PRO900X - Manual (Page 5)

P A G E 5 3276-A
SPECIFICATIONS
PRO900X
Note: Specifications are subject to change without prior notice.
Optical
PROJECTION SYSTEM — CRT; 7-inch High Performance Liquid
Cooled Tubes, 5-inch active phosphor area, 90 degree deflection
angle, Super Oxide Cathodes.
LENSES — High resolution color corrected multi-layered coating
hybrid lens system. fl.03 Aperature.
LIGHT OUTPUT — 700 Lumens peak light output.
CONVERGENCE — Digitally controlled analog with 10 factory pre-
set options, 5 customer memory locations plus a copy function
feature.
CONVERGENCE LIMITS — Less than 0.2% of vertical height.
SELF-GENERATED SET UP PATTERNS — Cross Hatch (coarse and
fine), convergence color pattern, static adjust.
SCHIEMPFLUG FOCUS — For edge focusing.
Inputs
RGB INPUTS — 5 - BNC analog (RGB H/V) with full VGA and
VESA Super VGA tracking compatibility.
COMPOSITE VIDEO INPUT — 1.0 Vp-p, 75 ohm (BNC jack), loop
through (NTSC 3.58, NTSC 4.43, PAL M/N, PAL B/G).
S-VIDEO INPUT — Y: 1.0 Vp-p 75 ohm; C: 0.28 Vp-p color burst
level (via mini DIN) connector.
DATA COMMUNICATIONS PORT — RS232 serial port.
POWER INPUT — Dual-range power supply 90-137 Vac, 180-264
Vac, 47-63 Hz.
Video Features
• Three-dimensional Digital Comb Filter.
• Two-dimensional Picture Sharpness Circuitry.
• Digital Dynamic Video Noise Reduction.
• Color Transient Improvement.
• Black Level Expansion.
• Auto Flesh Tone Correction.
• Video Edge Enhancement.
• Color Noise Reduction.
• Advanced Video DSP with 5 megabit memory.
• Extra Wide-band Video Amplifiers.
• High Resolution AKB with programmable white balance
control.
• Picture setup via source selection.
• World Wide Multi-standard Video System
(PAL M/N, PAL B/G, NTSC).
• Aspect Ratio Correction.
• Multi-Frequency, Multi-Format High Definition System (15 to
50 kHz, 75 MHz dot clock).
• Addressability via IR for multiple projection unit applications.
• On-Screen Display capable of 13 x 32 character display
resolution.
General
HORIZONTAL SCAN FREQUENCY — 15.0-50.0 kHz.
VERTICAL SCAN FREQUENCY — 40.0 - 100 Hz.
RETRACE TIME — Horizontal: < 3.5 µS (15.0 - 50.0 kHz).
Vertical: 450 µS (40.0 - 100 Hz).
BANDWIDTH — 37.5 MHZ (-3dB).
RGB RESOLUTION — 1920 x 1080 (interlace).
VIDEO RESOLUTION — 800 TV Lines.
SIZE ADJUSTABLE — 48 - 192 inches wide.
SCREEN CONFIGURATION — Front or rear, floor or ceiling mount,
with simple scan reversal.
COLOR BALANCE — Four user selectable settings:
3200/6500/9300/Custom.
HIGH VOLTAGE — 32 kV.
POWER CONSUMPTION — 600 Watts max.
AC POWER CORD — 3 meters.
WEIGHT — 43.13 kg / 95 lbs.
ENVIRONMENT — Operating Temperature: 0 to 40º C (degrees);
Humidity: 0 to 90 percent non-condensing;
Storage: 10 to 50º C (degrees)
SAFETY AND REGULATION —
• UL: Complies with UL 1950.
• CSA: Complies with CSA C22.2 No. 950.
• FCC: Complies with FCC Class B Regulations.
• European: CE Mark. Complies with IEC 950.
• DHHS: Complies with X-Ray Emission Regulations.
• NOM: Complies with Mexico Standards.
MECHANICAL DIMENSIONS — 12.90 inches (H), 25.75 inches (W),
33.28 inches (D).
REMOTE CONTROL SYSTEM — Two IR receivers for front and rear
remote access. Installer’s remote provides full control of menus
and convergence. Operators remote is point and click trackball.
Formats Supported
NTSC
3.58
NTSC 4.43
PAL M, N, B, G.
VGA IBM Standard
SVGA VESA Standard, 1024 x 768
Mac II 640 x 480, 35kHz
Grand
HDTV Formats. 1280 x 720, progressive,
Alliance 16 x 9 aspect ratio. 1920 x 1080, interlaced, 16 x 9
aspect ratio, per SMPTE specification, tri-level sync.