Olympus FL-40 - Manual (Page 9)

49
E
Names of Control panel
MEMO
• Slide the ON/OFF switch to Onside with the BACKLIGHT button held down to switch the
unit of focal range between m and ft.
2nd - CURTAIN SYNCLO
Guide No./ISO
Control mode
Illuminating angle
Wide-angle flash
mode icon
Focal range F-No.
E
Loading Batteries
Batteries must be loaded into the flash before the flash can be mounted on
the camera. This flash takes any four of the following batteries:
• 1.5 V AA alkaline batteries(type LR6)
• Ni-MH batteries(type HR-AA)
• Ni-Cd batteries(type KR-AA)
Do not mix batteries of different manufacture or mix old batteries with new
batteries. Also, before long periods of disuse, remove the batteries from the
flash. Remember that conserving battery power not only saves you money,
but protects the environment as well.
1 Slide the cover towards the flash head and lift up and away from the
flash to detach the cover from the battery compartment.
2 Insert the batteries in the directions indicated in the illustration.
3 Slide the battery compartment cover back on and close securely.
1
2
3