Preparing your receiver, Using one remote control for more than one unit, Installing the remote control’s batteries – Optimus STAV-3690 User Manual

Page 13

Advertising
background image

13

Preparing Your Receiver

Using One Remote Control
for More than One Unit

If you also have an Optimus professional series CD player, VCR, or cassette
deck with the OSR mark (

), you can connect its

CONTROL IN

jack to the

receiver so you can control all of your equipment with a single remote control.
You can also use the other component’s remote control by pointing it at the
receiver’s front panel.

1. Connect each component to the receiver as shown in “Connecting Pro-

gram Sources” on Page 8.

Note: You must connect the audio cables between the receiver and the
other audio accessory to use your receiver’s remote control to control the
accessory.

2. Connect the cable supplied with the CD player, VCR, or cassette deck to

the receiver’s

CONTROL OUT

jack and the other component’s

CONTROL IN

jack.

3. When you want to control more than one other component using the re-

ceiver’s remote control, daisy-chain the

CONTROL OUT

and

CONTROL IN

connections as shown.

Installing the
Remote Control’s Batteries

The remote control uses two AAA batteries (not included). For the longest bat-
tery life, we recommend alkaline batteries (RadioShack Cat. No. 23-555).

1. Press and slide open the battery compartment cover.

2. Place two fresh AA batteries in the compartment as indicated by the po-

larity symbols (+ and –) marked in the compartment. Then replace the
battery compartment cover.

Note: When you plug the cable into a
component’s

CONTROL IN

jack, that com-

ponent’s remote sensor does not func-
tion.

Cautions:

• Use only fresh batteries of the recom-

mended size and type.

• Do not mix old and new batteries, dif-

ferent types of batteries (standard,
alkaline, or rechargeable), or re-
chargeable batteries of different ca-
pacities.

• Always remove old or weak batteries.

Batteries can leak chemicals that can
damage electronic circuits.

Note: If the remote’s range is reduced,
replace the batteries.

IN

CONTROL

OUT

CONTROL

IN

OUT

Receiver

Remote

Other Component
with OSR Mark

To the CONTROL IN Jack

Control

of Another Component
Having the OSR Mark

Advertising
This manual is related to the following products: