Olympus P-11 - Manual (Page 20)

20
Loading paper
ENGLISH
Preparation
Printing
Introduction
For Your Reference
Note
Always use specialty paper. Using paper other than specialty paper
such as inkjet printer paper may cause a printer failure such as paper
becoming jammed or sticking to the ink ribbon.
Do not touch the print surface (the blank,
glossy surface) when handling paper.
Do not store paper in a place subject to high temperature, high humidity, or
direct sunlight.
Do not leave paper in a place subject to excessive dust. Fingerprints or
dust on the print surface may degrade print quality.
Up to 50 sheets of paper can be placed in the paper tray. Be careful not to
exceed this number when loading additional paper. Loading too many
sheets of paper may cause a paper jam.
Folding or bending paper may cause a paper jam.
Do not write on paper before printing a picture on it. If you want to write
something, use an oil based pen after printing. It is not possible to print
characters on this paper from a word processor or typewriter.
Printing on 4 × 6 paper
1
Open the tray cover while simultaneously pressing in both tray
cover tabs, and then remove the conversion tray.
Loading paper into the paper tray
Tray cover tab
p11_e_000_bookfile.book Page 20 Monday, July 25, 2005 10:47 AM