Orion Car Audio 200 - Manual (Page 31)

FINE TUNING THE CROSSOVER
The crossover section is marked at four frequency points for ease of system adjustment. These points
are 45Hz, 175Hz, 600Hz and 5,000Hz. Specific crossover points can be chosen based on the recom-
mended operational bandwidth of your speakers.
There are three small dots on the frequency range dial. These dots represent commonly used ORION
crossover frequencies. These crossover frequencies are 85Hz, 2,500Hz and 3,500Hz respectively.
85Hz
2,500Hz
3,500Hz
XTREME amplifiers have separate front and
rear level adjustments. The input sensitivity
of these adjustments range from 200mv up
to 5Vrms on the RCA inputs. This allows easy
integration from any source unit either with
RCA outputs or speaker outputs. Refer to
the Testing the System and the Adjusting
the Sound of the System sections for
detailed instructions on setting up the level
controls.
SIGNAL INPUT AND OUTPUT LEVEL CONTROLS
When the switch is in the right position, the crossover is configured for low-pass operation. XTREME amplifiers
have a fixed frequency crossover set to 100Hz at 12dB/octave.
page 29