Oki CX3641 MFP - Manual (Page 11)

C OMMAND W ORK S TATION , 11
Configuring the connection to the CX3641MFP
The first time you start Command WorkStation, you are prompted to configure the
connection to the CX3641MFP.
You can also edit the configuration whenever there is any change to your CX3641MFP
server or network, such as a changed server name or IP address. If you change
CX3641MFP Setup information, do so before you reconfigure the connection. For
information about reconfiguring the connection, see
“To modify the configuration for
Command WorkStation, Windows Edition” on page 13.
B EFORE YOU BEGIN
• Print the CX3641MFP Configuration page.
For instructions on printing the Configuration page, see Configuration and Setup .
This page contains information you need when configuring the connection, such as the IP
address of the CX3641MFP. For TCP/IP installations, you can use the DNS name instead
of the IP address. Make sure the CX3641MFP is already registered in a Domain Name
Server (DNS) on your network. For more information, contact your network
administrator.
T O CONFIGURE THE CONNECTION FOR C OMMAND W ORK S TATION , W INDOWS E DITION
1 Choose Start > Programs > Fiery > Command WorkStation to start the utility.
The Available Servers dialog box appears and displays all servers found in the local
subnet.