Onkyo TX-SR8350 - Manual (Page 36)

36
Using the Tuner
With the built-in tuner, you can enjoy AM and FM radio
stations. You can store your favorite stations as presets
for quick selection.
AM Frequency Step Setup
(not North America and Europe)
Here you can specify the AM frequency step used in
your area. When this setting is changed, all radio presets
are deleted.
Note:
• This procedure can also be performed on the remote
controller by using its [SETUP] button, arrow buttons,
and [ENTER] button.
■ Auto Tuning Mode
When tuned into a station, the TUNED indicator
appears. When tuned into a stereo FM station, the FM
STEREO indicator appears on the display, as shown.
■ Manual Tuning Mode
The American model changes FM frequency in 0.2 MHz
steps, 10 kHz steps for AM. For other models it’s
0.05 MHz steps for FM and 9 kHz steps for AM.
In Manual Tuning mode, FM stations will be in mono.
Tuning into weak FM stereo stations
If the signal from a stereo FM station is weak, it may be
impossible to get good reception. In this case, switch to
Manual Tuning mode and listen to the station in mono.
Listening to the Radio
1 Use the [TUNER] input selector
button to select either AM or FM.
In this example, FM has been selected.
(Actual display depends on country.)
1 Press the [SETUP] button and use the
Up and Down [
]/[ ] buttons to select
“0. Hardware Setup,” and then press
[ENTER].
2 Use the Up and Down [ ]/[ ] buttons
to select “AM Freq,” and then use the
Left and Right [
]/[ ] buttons to
select:
10 kHz: Select if 10 kHz steps are used in your
area.
9 kHz: Select if 9 kHz steps are used in your
area.
3 Press the [SETUP] button.
Setup closes.
TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE RETURN
TUNING / PRESET
ENTER
SETUP
STANDBY
STANDBY/ON
CLEAR
PURE AUDIO PHONES MULTl CH DVD VIDEO 1 VIDEO 2
VCR
VIDEO 3 TAPE TUNER CD VIDEO
VIDEO 3 INPUT
AUDIO L R
MASTER VOLUME
A SPEAKERS B
TUNING
TUNER
TUNING MODE
TUNER
Band Frequency
Tuning into Radio Stations
1 Press the [TUNING MODE] button
so that the AUTO indicator
appears on the display.
2 Press the TUNING Up or Down
[
]/[ ] button.
Searching stops when a station is
found.
1 Press the [TUNING MODE] button
so that the AUTO indicator disap-
pears from the display.
2 Press and hold the TUNING Up or
Down [
]/[ ] button.
The frequency stops changing when
you release the button.
Press the buttons repeatedly to change
the frequency one step at a time.
TUNING MODE
TUNING / PRESET
ENTER
AUTO TUNED
FM STEREO
TUNING MODE
TUNING / PRESET
ENTER