Olympus WS-321M - Manual (Page 26)

26
2
1 While the recorder is stopped,
press the
MENU button for 1
second or longer.
The “Menu” screen opens ( ☞ P. 42).
2 Press the OK or 9 button.
The “Rec Menu” screen opens.
3 Press the
+
or
–
button to choose
“Low Cut Filter”.
4 Press the OK or 9 button.
The Low Cut Filter setup process begins.
5 Press the
+
or
–
button to choose
between “On” and “Off”.
On: Low Cut Filter will be turned on.
Off: Low Cut Filter will be canceled.
6 Press the OK button to complete
the setup screen.
If the 0 button is pressed, the setting
will be canceled and it will return to the
“Rec Menu” screen.
7 Press the STOP button to close the
menu.
If it is set to “On”, will appear on the
display.
a Low Cut Filter indicator
The recorder has a Low Cut Filter function to minimize low-frequency sounds and record
voices more clearly. This function can reduce noise from air conditioners, projectors and
other similar noises.
Set the Low Cut Filter (Low Cut Filter)
2
1
3
5
4 O n
O f f
Low Cut Filter
Rec Mode
Mic Sense
VCVA
Low Cut Filter
e c M e n u R
120
1
1 H 27 M 53 S
20
HQ
0 0 M 0 0 S
a
Set the Lo
w Cut Filter (Lo
w Cut Filter)
7
6