Olympus WS-321M - Manual (Page 75)

75
5
Set the Recorder to HOLD Mode
Slide the HOLD switch in the
direction indicated by the
arrow while the recorder is not
in operation.
After “Hold” appears on the display,
the recorder is set to HOLD mode.
Exit HOLD Mode
Slide the HOLD switch in the direction opposite
that indicated by the arrow.
H o l d
Hold
If you bring the HOLD switch to the HOLD position, the
current conditions will be preserved, and all buttons and
switches will be disabled.This feature is useful when the
recorder has to be carried in a bag or pocket.
..................................................................................................................................................
Notes
• If you press any button in HOLD mode, the clock display flashes for 2 seconds, but it will not operate the
recorder.
• If HOLD is applied during playback (recording), operation is disabled with the playback (recording) state
unchanged. (When playback ends, or recording ends due to insufficient memory, the recorder will stop
once, then will automatically enter in hold status.)
Hold