Oki PRINTING SOLUTIONS MULTIFUNCTION PRINTER CX2633 - Manual (Page 20)

Getting started > 20
Paper Recommendations
Your unit will handle a variety of print media, including a range of paper weights and sizes,
transparencies and envelopes. This section provides general advice on choice of media, and
explains how to use each type.
The best performance will be obtained when using standard 20 to 24 lb. US Bond (75 to 90
g/m²) paper designed for use in copiers and laser printers. Use of heavily embossed or very
rough textured paper is not recommended.
Pre-printed stationery can be used, but the ink must not offset when exposed to the high
fuser temperatures used in the printing process.
Envelopes should be free from twist, curl or other deformations. They should also be of the
rectangular flap type, with glue that remains intact when subjected to hot roll pressure
fusing used in this type of unit. Window envelopes are not suitable.
Transparencies should be of the type designed for use in copiers and laser printers. We
strongly recommend Oki transparencies (Order No. 52205701). In particular, avoid office
transparencies designed for use by hand with marker pens. These will melt in the fuser and
cause damage.
Labels should also be of the type recommended for use in copiers and laser printers, in
which the base carrier page is entirely covered by labels. Other types of label stock may
damage the printer due to the labels peeling off during the printing process. A suitable type
is Avery White Laser Label type 5161 (Letter) or types 7162, 7664, 7666 (A4).
Cassette Trays
If you have identical paper stock loaded in another tray (2nd/3rd tray if you have one, or
the multi purpose tray) you can have the unit switch to another tray when the current tray
runs out of paper. When printing from Windows applications, this function is enabled in the
driver settings. When printing from other systems, this function is enabled in the Paper
Setup menu (See “Paper Setup” on page 30).
If fitted, tray 2 (or 3) may be removed and replenished while the machine is being fed from
tray 1. Tray 1 cannot be removed while the machine is being fed from tray 2 (or 3) because
parts of tray 1 are used to guide paper fed from tray 2 (or 3).
SIZE DIMENSIONS WEIGHT
Letter 8.5 x 11 inches Light
17-22 lb. US Bond
64-82 g/m²
Medium
24-28 lb. US Bond
83-105 g/m²
Heavy
29-32 lb. US Bond
106-128 g/m²
Ultra Heavy
35-53 lb. US Bond
129-200 g/m²
Note:
Tray 1 supports up to 32 lb.
US Bond (120 g/m²).
> 47 lb. US Bond (176 g/
m²) - MP Tray only.
Legal 13in. 8.5 x 13 inches
Legal 13.5in. 8.5 x 13.5 inches
Legal 14in. 8.5 x 14 inches
Tabloid 11 x 17 inches
Executive 7.25 x 10.5 inches
A6 105 x 148 mm
A5 (Tray 1 only) 148 x 210 mm
B5 182 x 257 mm
A4 210 x 297 mm
B4 250 x 353 mm
A3 420 x 297 mm