Ohlins FG 670 - Manual (Page 20)

Individual adjustments
Individual adjustments
Below you can find the recommended ad-
justment range for the top left compression
leg adjuster, with different positions on the
bottom base valve. From soft to hard:
Base 19 clicks, top 17-20 clicks
Base 16 clicks, top 14-18 clicks
Base 12 clicks, top 11-14 clicks
Base 10 clicks, top 10-12 clicks
Base valve:
The left bottom base valve can be ad-
justed from 8- 13 clicks, if top compression
is set at 12 clicks open.
Other tips and tricks
For on track adjustments and satisfying
your riders needs we could also look at the
adjuster from this angle:
1.
The compression damping from your left
base valve can be adjusted when you need
more compression damping, but you don’t
want the damping to react too quick! Let’s
say the rider needs more damping during
braking, then close the bottom adjuster 1-3
clicks since this adjustment will have time
to react during braking, but will allow the
front fork to go smoothly over bumps at
hard cornering.
2.
If the rider complains about lack of ”tire
feel” you can improve this by closing the
top left compression adjuster (2-3 clicks)
since these adjustments will give a quicker
response. This could also improve the
rider’s initial dive of the front fork when he
is applying the front brake NB! By closing
this adjuster too much, can also remove
some comfort and make the fork feel hard
and harsh.
Should the above instructions not be
enough or the standard setting somehow
not meeting the needs for you riders, then
please contact Öhlins racing AB Sweden
for setting information rather than attempt-
ing to modify the setting yourself. We have
a vast setting bank for this front fork with
balanced and matched settings to choose
from.
20
Compression adjustment
Left Hand Fork Leg
Tool 794-01
Clockwise turn
closes = increase
compression
damping
Counter clockwise
turn opens = reduce
compression damping
Rebound adjustment
Right Hand Fork Leg
Tool 794-01 Clockwise turn
closes = increase
rebound damping
Counter clockwise
turn opens = reduce
rebound damping
SOFT
HARD
Compression adjusment reservoir valve (Base valve))
Clockwise turn closes =
increase compression damping
Counter clockwise turn opens =
reduce compression damping
Tool 794-01