Olympus MR-500i - Manual (Page 28)

28
Ge
tting St
a
rte
d
Transferring music/photos from m:trip to your m:robe
C Check that “PC” is selected.
If “PC” is not selected, touch “PC.”
D Touch “OK.”
The “m:robe SETTINGS” screen reappears.
To return to the “HOME” screen
Touch in the bottom right corner of the screen.
2
Connect your m:robe to your computer.
A Connect the AC adapter to the cradle.
Connect the AC cord to the AC adapter, connect the AC adapter to the DC IN 5V jack, and then plug
the AC cord into a wall outlet.
B Connect your computer and the cradle using the dedicated USB cable.
Connect the connector with the arrow marks facing down to the USB jack of the cradle.
C Place your m:robe in the cradle.
Tip
You can also connect your m:robe directly to the computer as shown above. When connecting directly to the computer,
check that the battery is fully charged.
Note
If your m:robe stops operating while communicating with your computer, your computer may malfunction or data may be
lost. We recommend using the AC adapter when connecting to your computer.
B
C
A
B
Computer
To USB jack
Cradle
(supplied)
To PC connecting
jack
To USB jack
AC adapter
(supplied)
To a
wall outlet
To DC IN 5V jack
00MR500i_E.book Page 28 Thursday, November 4, 2004 6:22 PM