Omega A2400 - Manual (Page 27)

Command Set 4-6
Each A2400 user command is described in detail following Table 4.1. All of
the commands are listed in alphabetical order according to command
nomenclature.
Table 4.1 A2400 Command Set
Command and Definition Typical Typical
Command Response
Message Message
($ prompt)
DO Digital Output $1DO01 *
RD Read Data $1RD *+99999.99
REA Read Ex. Address $1REA *3031
RID Read Identification $1RID *TANK FARM 1
RLP Read Long Prompt $1RLP *7D
RS Read Setup $1RS *31070000
RSP Read Short Prompt $1RSP *7B
RSU Read Setup $1RSU *31070000
RT1 Read Time delay 1 $1RT1 *+00100.00
RT2 Read Time delay 2 $1RT2 *+00352.00
RT3 Read Time delay 3 $1RT3 *+00050.00
WE Write Enable $1WE *
Write Protected Commands
EA
Extended Address $1EA3031 *
ID IDentification $1ID TANK FARM 1 *
LP Set Long Prompt $1LP25 *
RR Remote Reset $1RR *
SP Set Short Prompt $1SP40 *
SU Setup $1SU31070000 *
T1 Set Delay Time 1 $1T1+00100.00 *
T2 Set Delay Time 2 $1T2+00352.00 *
T3 Set Delay Time 3 $1T3+00050.00 *
These A2400 Commands are Exclusively for Extended Address mode
CC
Close Channel {01CC *
OC Open Channel {01OC *