Omega A2400 User Manual
Page 50
Advertising
Delay Time Programming 6-4
Command:
$1T3+00050.00
(set T3 to 50 ms.)
Response:
*
Time may be set to 1 ms. resolution.
The T1, T2, T3 commands are write-protected and must be preceded by a
Write Enable (WE) command.
The delay times are stored in nonvolatile memory.
The delay times are inactive in Default Mode.
The delay times stored in the A2400 may be read back with RT1, RT2, and
RT3 commands:
Command:
$1RT1
Response:
*+00100.00
Advertising