Front & rear panels —continued – Onkyo 29344937 User Manual
Page 13
13
REMOTE CONTROL
This
(Remote Interactive) jack can be
connected to the
jack on another
-capable
Onkyo component for remote and system control.
To use
, you must make an analog audio
connection (RCA) between the AV receiver and the
other component, even if they are connected
digitally.
CD IN
This analog audio input is for connecting a CD
player’s analog audio output.
TV/TAPE IN/OUT
These analog audio input and output jacks are for
connecting a recorder with an analog audio input
and output, such as a cassette deck, MD recorder,
etc.
CBL/SAT IN
A cable or satellite receiver can be connected here.
There is composite video input jack for connecting
the video signal, and there are analog audio input
jacks for connecting the audio signal.
VCR/DVR IN/OUT
A video component, such as a VCR or DVR, can be
connected here for recording and playback. There is
composite video input and output jack for
connecting the video signal, and there are analog
audio input jacks for connecting the audio signal.
DVD/BD IN
This input is for connecting a DVD/BD player.
There is composite video input jack for connecting
the video signal.
ZONE 2 LINE OUT L/R
These analog audio outputs can be connected to the
line inputs on amplifiers in Zone 2.
SUBWOOFER PRE OUT
This analog audio output can be connected to a
powered subwoofer.
FRONT HIGH L/R speakers
These terminals are for connecting the front high
L/R speakers.
The FRONT HIGH L/R terminal can be used with
front high speakers respectively, or used to connect
the speakers in Zone 2.
See “Connecting Zone 2” on page 80.